DynamoDB Pricing 2026: On-Demand Rates, the Free Tier and Write Amplification
DynamoDB on-demand costs $0.125 per million read units, $0.625 per million write units and $0.25 per GB-month after 25 GB free (US East). Exact 2026 rates, how one request becomes several units, three worked bills, and the scan that costs $4,700 a month.
DynamoDB on-demand pricing is two meters and a storage line: you pay per read request unit, per write request unit, and per gigabyte stored. The rates are low. The bill surprises people because of how a single request turns into several units. Here are the exact rates as AWS publishes them for US East (N. Virginia), read on October 18, 2026, and the multipliers that decide what you actually pay.
TL;DR: the gotcha
A write is billed per 1 KB, a read per 4 KB, and both round up. A 1.1 KB item costs two write units every time you save it, a transactional write costs double, and every global secondary index you add writes its own copy. The rate card says $0.625 per million writes; a table whose two indexes each project the whole 1.5 KB item pays $3.75 per million saves.
The rates, exactly (US East, on-demand)
| Charge | Standard table | Standard-Infrequent Access |
|---|---|---|
| Read request units | $0.125 per million | $0.155 per million |
| Write request units | $0.625 per million | $0.78 per million |
| Storage | $0.25 per GB-month | $0.10 per GB-month |
| Free storage | 25 GB a month |
These are half of what on-demand cost before November 1, 2024, when AWS cut on-demand throughput prices by 50%. Plenty of articles and calculators still quote the old $0.25 and $1.25.
How a request becomes units
| Operation | Units per request |
|---|---|
| Eventually consistent read | 0.5 RRU per 4 KB |
| Strongly consistent read | 1 RRU per 4 KB |
| Transactional read | 2 RRU per 4 KB |
| Standard write | 1 WRU per 1 KB |
| Transactional write | 2 WRU per 1 KB |
Sizes round up, so a 200-byte read is billed as a full 4 KB read and a 200-byte write as a full 1 KB write.
Three worked bills
| Workload | Monthly bill |
|---|---|
| 10M eventually consistent reads, 1M writes, 1 KB items, 5 GB stored | $1.25 |
| 30M reads, 3M writes, 2 KB items, 2 GB stored | $5.63 |
| 50M reads, 5M writes, 4 KB items, 200 GB stored | $59.38 |
In the last row, storage is $43.75 of the total: 175 GB over the free 25 GB at $0.25. For large, rarely read tables, the Standard-Infrequent Access class charges $0.10 per GB-month instead of $0.25, while making each request dearer.
The one you will actually hit
For most apps it is write amplification, not read cost. Three things multiply each save:
- Item size. Writes round up per kilobyte, so an item that grows from 0.9 KB to 1.1 KB doubles its write cost overnight.
- Indexes. Each global secondary index that includes the item is written too, and bills its own write units.
- Transactions.
TransactWriteItemscharges two write units per kilobyte.
Reads have a different trap: a Scan reads every item in the table. Scanning a one-million-item table of 1 KB items costs about 125,000 read units with eventual consistency, about $0.016. That is nothing once, and roughly $4,700 a month if a page view triggers it ten thousand times a day.
What else is billed
Backups, point-in-time recovery, DynamoDB Streams reads beyond the free 2.5 million a month ($0.02 per 100,000), global tables (each replica's writes are billed as replicated write units), and data transfer out of AWS. None of these appear in the two headline rates.
When DynamoDB is the right call anyway
If you are already on AWS, need single-digit-millisecond reads at any scale, and want zero servers to run, DynamoDB is hard to beat, and at the rates above a small or medium app pays only a few dollars a month. It gets expensive when items are large, indexes multiply writes, or code scans.
If your access pattern is steady
We build BaseKV, a disk-backed key-value store with flat plans, so treat this as the biased paragraph. Metered units suit spiky or tiny workloads. If yours is steady and you would rather not count kilobytes, compare the options on your own numbers in the KV cost calculator.
Related: KV cost calculator, Cheap DynamoDB alternatives, DynamoDB alternative for small workloads, Cloudflare Workers KV limits
Frequently asked questions
How much does DynamoDB on-demand cost?
In US East (N. Virginia), $0.125 per million read request units, $0.625 per million write request units and $0.25 per GB-month of storage, with the first 25 GB of storage free. These rates are half of the pre-November 2024 prices.
How are DynamoDB read and write units calculated?
Reads are metered per 4 KB: 0.5 unit eventually consistent, 1 strongly consistent, 2 transactional. Writes are metered per 1 KB: 1 unit standard, 2 transactional. Sizes round up, so a 1.1 KB item costs two write units.
Is DynamoDB free?
25 GB of storage is in the AWS Free Tier. On-demand reads and writes are billed from the first request, though at these rates 10 million reads and 1 million writes of small items cost about $1.25 a month.
Why is my DynamoDB bill higher than expected?
Usually write amplification: items just over a 1 KB boundary, global secondary indexes that each write their own copy, and transactions that double the units. On the read side, a Scan reads every item in the table and bills for all of it.